Boat Maintenance: Remove 2-stroke oil pump and premix.
(Lake Guntersville Specific)
10 messages
Updated 5/16/2020 9:04:50 AM
Lakes Online Forum
83,915 messages
Updated 9/7/2024 7:52:09 AM
Lakes Online Forum
5,200 messages
Updated 8/23/2024 12:20:47 PM
(Lake Guntersville Specific)
82 messages
Updated 3/22/2016 11:10:41 PM
Lakes Online Forum
4,171 messages
Updated 6/27/2024 7:05:46 AM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,979 messages
Updated 6/26/2024 5:03:03 AM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
|
Name:
|
Pontoonfisher
-
|
Subject:
|
Remove 2-stroke oil pump and premix.
|
Date:
|
4/18/2019 7:26:16 PM
|
|
Just purchased 2001 Merc 40hp 2 cyl. with low hours. Less than 40. I have owned several two strokes in the past and never bypassed the oil pump and pre mixed. Thinking about doing it with this one. Just wondering the best way. I’m going to remove the linkage from the carb to the oil pump. Connect the fuel line directly to fuel pump. My debate is to fill the oil pump with synthetic motor oil and connect the input and output ports to circulate the oil or just pull the oil pump gear. I’m leaning towards pulling the oil pump gear and plugging the oil pump ports. Anyone done this? Thoughts?
|
|