Boat Maintenance: Trim Issue Similar to Earlier Post

Lake Dillon Topics

(Lake Dillon Specific)

1 messages

Updated 5/21/2005 12:21:50 AM

Off-Topic

Lakes Online Forum

84,091 messages

Updated 11/8/2024 10:28:12 AM

Boat Maintenance

Lakes Online Forum

5,204 messages

Updated 9/14/2024 10:10:50 AM

Lake Dillon Fishing

(Lake Dillon Specific)

0 messages

Updated

Jokes

Lakes Online Forum

4,172 messages

Updated 9/9/2024 5:04:44 PM

Sports

Lakes Online Forum

4,262 messages

Updated 11/6/2024 6:43:09 PM

Grilling & Recipes

Lakes Online Forum

2,979 messages

Updated 6/26/2024 5:03:03 AM

Tallapoosa River Topics

Lakes Online Forum

98 messages

Updated 4/15/2024 1:00:58 AM

Forum Usage Rules

Welcome, Guest

Select View Mode: [ classic | beta | recent ]

	Name:	Dippin Skinny -
	Subject:	Trim Issue Similar to Earlier Post
	Date:	4/30/2013 4:51:57 PM

I have a 2001 Mercruiser Stern Drive with Tilt and Trim. I have already replaced the solenoid on the up-side, both the up and trailer side work fine. My issue is with the trim down side. It has worked dependably for the most part up through the end of last season. I say for the most part because there would be times that it would not. So I'd bump the trim up a time or two and then it (down) would work. My thought was that the solenoid was going out and I'd have to replace it eventually. When I started my spring cleaning and tried to trim the drive down to fire it up.....nothing! So off to the shop, replace the solenoid (not as easy as the up btw). Hooked everything back up, tossed the extra parts over my left shoulder out of the right side of the boat for good luck, and ....nothing! If I bump the trailer button and then immediately hit the trim down it will work. But if I just cold press the down button I get nothing. So my thinking is that I shouldn't have to do that. I also think it tells me that I have a short, and electricity can't cross that short unless I bump the up side first. And so my guess is that it's not at the trim motor end of the circuit, but possibly at the throttle end. Any insight would be helpful. I've already mowed the grass, so finding the extra parts that I threw overboard is not an option. :D

Steve

Other messages in this thread:

View Entire Thread

Trim Issue Similar to Earlier Post - Dippin Skinny - 4/30/2013 4:51:57 PM

Trim Issue Similar to Earlier Post - CAT BOAT - 4/30/2013 6:16:30 PM

Trim Issue Similar to Earlier Post - Dippin Skinny - 5/2/2013 5:16:04 PM

Trim Issue Similar to Earlier Post - CAT BOAT - 5/2/2013 8:29:26 PM

Quick Links
Lake Dillon News
Lake Dillon Photos
Lake Dillon Videos