Forum Thread

Lake Hood Topics

(Lake Hood Specific)

3 messages

Updated 11/14/2008 1:35:30 PM

Off-Topic

Lakes Online Forum

84,091 messages

Updated 11/8/2024 10:28:12 AM

Boat Maintenance

Lakes Online Forum

5,204 messages

Updated 9/14/2024 10:10:50 AM

Lake Hood Fishing

(Lake Hood Specific)

0 messages

Updated

Jokes

Lakes Online Forum

4,172 messages

Updated 9/9/2024 5:04:44 PM

Sports

Lakes Online Forum

4,262 messages

Updated 11/6/2024 6:43:09 PM

Grilling & Recipes

Lakes Online Forum

2,979 messages

Updated 6/26/2024 5:03:03 AM

Tallapoosa River Topics

Lakes Online Forum

98 messages

Updated 4/15/2024 1:00:58 AM

Forum Usage Rules

Name:	Beekeeper Tony -	Reply
Subject:	Gas cut off for my boat
Date:	6/13/2012 4:55:43 PM

I have a inboard motor and the gas line is 5/8". I was wondering what type of gas cut off could I cut in the line so I can save my carb from gumming up.

Any ideas?

Name:	HP HQ -	Reply
Subject:	Gas cut off for my boat
Date:	6/13/2012 7:09:13 PM

Did you mean 3/8?

Name:	Summer Lover -	Reply
Subject:	Gas cut off for my boat
Date:	6/14/2012 10:21:39 AM

Have you tried running Sta-Bil - it works wonders. I use it in the truck we leave at the lake, the boat and all fuel for small motors.

Name:	Beekeeper Tony -	Reply
Subject:	Gas cut off for my boat
Date:	6/14/2012 5:56:28 PM

Yeah, 3/8 is right... I just want to make sure I get the gas out everytime... I probably should use some Sta-bil also.

Name:	HP HQ -	Reply
Subject:	Gas cut off for my boat
Date:	6/14/2012 6:32:41 PM

Get a brass ball valve, with 3/8 female pipe, install 3/8 pipe to 3/8 nipple on both sides using tread sealer not teflon tape, and your done.

Name:	CAT BOAT -	Reply
Subject:	What he said..
Date:	6/14/2012 6:45:11 PM

When you install the cut off valve (should you decide to do it yourself) you would be way ahead if you install it as close to the carburator as possible. Should you install the "cutoff" at the "feed line" from the tank, you will have to run the engine for sometime. The engine will have to sip most of the fuel from the water/fuel seperator, fuel pump, etc. If you put it close to the carb, or at the carb, then only the carb has to run dry before the engine quits. My .02 worth. If you have a Carbed engine with TKS system (electric fuel pump, TURN KEY START) you really need to prepare your cut off valve properly. Those electric fuel pumps ain't cheap, and don't like to run dry.

Just sayin'
CAT, headed to Sammys Saloon for the day.

Name:	Pontoonfisher -	Reply
Subject:	Gas cut off for my boat
Date:	6/15/2012 11:29:58 AM

Maybe someone else has some input but I am under the impression that it is not always a good idea to store your motor with no fuel in the fuel system because of condensation and rust problems. It is better to leave treated fuel or fog the motor if storing for extended periods.

Name:	CAT BOAT -	Reply
Subject:	Gas cut off for my boat
Date:	6/15/2012 1:05:59 PM

Due to all the Ethanol problems, we have switched policy from storing full a few years ago to storing empty. If we can't extract the fuel, we treat it of course. It is of my opinion that this a better way to do long term storage. My .02 worth.

Steve

Quick Links
Lake Hood News
Lake Hood Photos
Lake Hood Videos