(Pine Flat Lake Specific)
1 messages
Updated 8/24/2023 2:17:41 AM
Lakes Online Forum
83,914 messages
Updated 9/6/2024 8:17:32 PM
Lakes Online Forum
5,200 messages
Updated 8/23/2024 12:20:47 PM
(Pine Flat Lake Specific)
0 messages
Updated
Lakes Online Forum
4,171 messages
Updated 6/27/2024 7:05:46 AM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,979 messages
Updated 6/26/2024 5:03:03 AM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
Just purchased a 2007 5.0/Alpha Sea Ray Select with only 17.6 hours. All works great except the trim. It will move both up and down but travel is well short of the full up position. Trim was fine until today.
|
Name: |
CAT BOAT
-
|
|
Subject: |
Trim issue
|
Date:
|
6/15/2016 4:32:59 PM
|
Make sure there is not an extra UP/Trailer button on the lever/control. Also make sure you are pushing the UP switch hard enought to make it click again. What you are experiencing is the TRIM LIMIT unit located at the pivot point on the alpha drive. Call me and I will explain.
Steve
|
Thanks for the response, I began thinking about the SmartCraft settings after I posted. I will be back down at the boat Friday and plan to run through the calibration process then.
|
|
|